Watts (R13-1200) R13 Series Reverse Osmosis 1200 GPD System
The R13-1200 Reverse Osmosis System has features that are normally reserved for much larger and more expensive RO systems. The system shown includes an optional leg kit. R-13 Compact Wall Mount RO Reverse Osmosis System features a 1200 gallon per day capacity.
Standard features:
• Powder coated steel frames
• Inlet solenoid valve
• Pre-filter
• 1/2 HP motor
• Brass pump
• Liquid filled pre-filter pressure gauge
• 2 1/2” liquid filled pump pressure gauge
• Product water & reject water flow meters
• High pressure, non-metallic membrane housings
• SS needle valves for concentrate and recycle lines
• Stainless steel product water check valve
• On / off toggle switch
• Low-pressure shut-off with auto restart
• Feed water and product water TDS monitor
Specifications
| Feed water connection | 3/4″ NPTF |
| Product water connection | 3/8” Tubing OD |
| Reject water connection | 3/8” Tubing OD |
| Feed water required (max.) | 2.4 GPM |
| Feed water pressure (min.) | 10 PSI |
| Drain required (max.) | 2.4 GPM |
| Electrical requirements | 120 VAC 60 Hz |
| Current | 8 Amps |
| Pump | 1/2 Horsepower |
| Maximum production | 1200 gallons per day |
| Average membrane rejection rate | 96 to 98% |
| Recovery (adjustable) | 34 to 75% |
| Membrane size | 3” x 20” nominal |
| Number of membranes | 2 |
| Pre-filter | 20″ x 2.5″ x 5 micron melt blown polypropylene |
