Iron, Manganese and Anti Scale Water Conditioner
A combination of a Iron, Manganese and Hydrogen Sulfide Removal and An Anti-Scale Water Conditioner. This unit works in situation where iron and hydrogen sulfide reduction is desired and water is hard. For whole house and small commercial applications.
A back-washing system comes in 2 different sizes for smaller or larger homes.
No regeneration, no salt is required!
Water travels through 4 stages of filtration:
- First, water travels through a 20″ sediment cartridge that removes sediment, silt, sand and dirt. Also this extends the life of water softeners and water filters, and prevents damage to control valves or pumps.
- Next, water travels through a 1.5 or 2.0 cubic foot tank that has Iron, Manganese and Hydrogen Sulfide removal media, with an Automatic Microprocessor Control valve (The longer amount of time that the water is in contact with the media, the more effective is the conditioning and filtering of the water.)
- In Stage 3, water travels through an anti-scale water conditioner media to reduce calcium build-up and water hardness.
- Finally, water travels through a 20″ solid carbon cartridge for a final conditioning of the water and removing any remaining contaminates and VOC’s which may be in the water.
Both tanks can be automatically back-washed into a drain or outside. There are no harsh chemicals, the system is environmentally friendly!
Iron, Hyrdogen Sulfide and Anti-Scale Dual Filter features
- Poly Glass™ mineral tank
- Riser style 1″ internal flow distributor
- Microprocessor with LED display – backwash cycle is controlled by an electronic valve.
- Compact turbine meter
- No backwash is required for anti-scale media!
- NOVRAM valve status and memory backup
Backwash capacity handles tanks up to 12″ diameter for softener applications, 10″ for filter applications.Iron, Manganese, Sulfide and Anti-Scale Conditioner System properties:
- Chrome sleeve/jacket – Polyester fiberglass tank
- 3/4″ or 1″ Stainless Steel Bypass Valve
- NSF-certified component
- Use on cold water only!
- Maximum free chlorine 1 PPM
- Maximum Flow Rate: 11 GPM for 1.5 cu.ft., 13 GPM for 2 cu.ft.
Media and Filter Replacement Intervals
Sediment filter cartridge and Solid carbon cartridge life: 6-8 months
Iron and Manganese media replacement after: 1.5 cu.ft ( CQE-WH-05231 ) – 5-7 years, 2 cu.ft – 7-8 years ( CQE-WH-05231A )
Iron and Manganese media replacement after: 1.5 cu.ft ( CQE-WH-05231 ) – 5-7 years, 2 cu.ft – 7-8 years ( CQE-WH-05231A )
